| NOTE: ALL SOFTWARE IS AVAILABLE ON AN "AS IS" BASIS. SEAOC DOES NOT GUARANTEE NOR DOES IT SUPPORT THE SOFTWARE AVAILABLE HERE. IT IS PROVIDED AS A PUBLIC SERVICE. USERS ARE ADVISED TO VERIFY ALL RESULTS MANUALLY BEFORE RELYING ON ANY AUTOMATED DESIGN SOFTWARE. | Page Last Updated
6/17/07
Load Combinations
Excel spreadsheet to assemble load combinations from indidual load cases in a flexible and efficient manner. (11/27/05)
+ Email | Web site | Contributed by Ondrej Kalny | Download (xls)
Inch-foot calculations
The attached file is a handy converter for inch-foot calculations. It will add, subtract, multiply and divide using feet and inches, displaying results in feet-inches and decimal feet. It can be unprotected (without password) if you wish to edit the formula.
+ Email | Contributed by Mubeen Cutchi, PE (Wisconsin) | Download (xls)
Section properties of a plate girder
This is a high quality Excel spreadsheet that derives the section properties of a steel plate girder, or beam.
+ Email | Web site | Contributed by Robert Nicolson | Download
Piling Repair
Innovative ways to repair wood, steel, concrete, and H-piles with ZERO downtime. Check out our Web site at www.pilecapinc.com to see the latest technology in piling repair.
+ Web site
IBC 2006 & ASCE7-05 edition
The application is created by Yo Ratanapeanchai, SE. This spreadsheet is intended as an educational tool for learning and understanding of the IBC 2006 and ASCE 7-05. It will perform both Fire Life Safety (chapter 3, 5, 6, 7, 8, 9, 10, 15 and 29) and Structural (Snow, Wind and Earthquake Load, Chapter 16 and ASCE7-05) .The application is freeware, so feel free to distribute, modify or use in anyway you see fit. Password protection is in place on some of the Worksheets and will not be given due to data integrity of the original development. Report by fax or email any errors or suggestions you may have. This will be greatly appreciated.
+ Email | Contributed by Yo Ratanapeanchai, SE. | Download (xls)
InertiaCalculator
InertiaCalculator is a structural utility program for calculating geometric and structural properties of built-up, custom, or composite cross sections for anyone who needs to calculate geometric or structural properties of plane areas. The purpose for InertiaCalculator is to help engineers determine properties of custom or combined sections for structural design. The tool has applications for architects, mechanical engineers, and others. It will calculate many properties including area, moment of inertia, section modulus, shear center location, principal axes and much more. No designer can afford to be without this powerful, easy-to-use, and ridiculously inexpensive tool.
+ Web site
Continuous Beam Influence Lines.
Excel spreadsheet calculates and graphs moment, shear and deflections influence lines in continuous beams.
+ Web site | Contributed by Yakov Polyakov | Download
Spreadsheets forCorbel Design and Wood Shear Wall with a opening
Concrete Corbel & Wood Shear Wall with an Opening The spreadsheets make structural design simplified. This package was contributed by Daniel T. Li
+ Email | Contributed by Daniel T. Li | Download
UBC Elements
UBC Elements is a windload evaluation program for Elements and Components in accordance with the Uniform Building Code. Evaluations for 1994 and 1997 Code Editions are included along with 1995 and 1998 California State Amendments.
+ Email | Contributed by Rod Stark | Download
Cbeam 2002
Cbeam 2002 is a continuous beam software package that allows the user to solve statically indeterminate beam structures. Defining multiple span elements of varying elasticity's with uniform, distributed and concentrated loading applications along with a variety of support conditions is easily at the hands of the user.
+ Email | Contributed by Rod Stark | Download
Aprop1.01
Aprop1.01 is an "Integration by Area" method that allows the user to determine section Properties of single entities, assemblies of multiple shapes, and/or built-up composites. Materials are allowed to vary within the assembly and composite routines which provides end results in an appropriate equivalent evaluated in terms of the selected primary material.
Aprop1.01 is an Visual Lisp routine that has been compiled for AutoCAD 2000® and Architectural Desktop® releases.
+ Email | Contributed by Rod Stark | Download
Simple Beam
Simple Beam is a framing member evaluation program for vertical and horizontal glazing components.The evaluation provides property verification in the form of „I required‰ and „S required‰ for various applications and loading conditions of simple span elements. Both uniform and trapezoidal load distributions may be utilized within the member analysis. In addition to structural property requirements generated, end reactions and internal bending moments are also provided.
+ Email | Contributed by Rod Stark | Download
97 UBC Lateral Design Spreadsheet, Version 1.01
This spreadsheet is intended as an educational tool for the learning and understanding of the Wood provisions of the 1997 Uniform Building Code. It will perform both flexible and rigid diaphragm analysis. This package requires Microsoft Excel. (First posted:10/18/99, Updated: 11/8/99 Version 1.01)
+ Contributed by Dennis Wish | Download
Data Extraction Tool for 97 UBC Lateral Design Spreadsheet
This is a data extraction tool for Autocad R14 and later. It can be used by users of the 97 UBC Design Spreadsheet posted above. It is simply two blocks that are to be inserted at each diaphragm coordinate along the edge AND another for insertion at the beginning and end of each wall segment designated as a shear wall or shear element. There are two template files to be used with the Autocad command ATTEXT which will extract the coordinates and save them Comma Delimited Format. The user only needs to open the extraction file in Excel. The data can be cut and pasted within the UBC spreadsheets on the Geometry-Wall worksheet for easy entry of the building coordinates.
+ Download
Two-cycle Moment Distribution - R/C Beam
This Excel spreadsheet performs two-cycle moment distribution per the PCA publication of the same name. It designs positive and negative moment reinforcement, stirrups, checks deflection, accounts for column stiffness and performs crack control analysis. (10/23/99)
+ Email | Contributed by Rod Stark | Download
StlShape
StlShape is a utility for structural engineers to use. It started with steel designs. Some concrete an wood-including glulam are added later on. Your suggestions for improvement are welcomed. [sic] Contact:
+ Email | Contributed by Szuchuan Chang | Download
Eccentric bolt group connection by LRFD 2nd Edition.
Excel spreadsheets calculates ultimate shear capacity of bolt group connection using instantaneous center method employed by LRFD steel design manual.
This package contributed by .
+ Email | Web site | Contributed by Yakov Polyakov | Download
quickBridge -- computes moment and shear envelopes
quickBridge is an Excel program which computes moment and shear envelopes generated by a moving truck. Trucks may have 2 to 20 axles and bridges 1 to 5 spans. Constant EI is used for all the spans. Results are displayed in tabular and graphical forms.
+ Email | Contributed by Noyan Turkkan | Download
enSketch Software
www.ensketch.com for civil/structural engineering design and sketch.
enSketch is stand-alone CAD 2D tools, it has built-in functions just for civil/structural engineers.
Setford is a civil/structural engineering toolbox for design, it includes our daily routine works, it is not a blackbox like other software. you can update and check the report.
Bar Bending Scheduler
Attached Bar Bending Scheduler works on BS 4466 bar shapes, and evaluates total cut length for various bar shapes per and can be easily modified to add or modify shapes. Instructions are on the sheet.
+ Email | Contributed by Mubeen Mo Cutchi | Download
|
